Today, I fitted the seats.
The middle seat was the easiest - it just fit. I carefully cut a slot for the daggerboard.
The other two required some work. I found the position for the forward seat by clamping the mast doubler into place. The plans showed that the front part of the double had to touch the bulkhead. So I sanded the seat and tilted it to the right position so it did.
The aft seat required the most sanding, but finally I got it into position.
I ended the day by bonding the mast doubler to the forward seat and starting to tape in preparation for gluing and filleting the seats.
No comments:
Post a Comment