Gluing the Seats

I bonded the seats in yesterday.

Here are the seats after sealing with epoxy and partial sanding. Note that I've added masking tape in preparation for filletting.


After seeing how hard it was to keep the seats in the right position, I decided to to bond the seats as a separate step before adding the fillets. I made my usual bonding mixture, coated the edges and put the seats in. I had to add some weights and clamps to get the seats to stay put in the right position. I carefully checked for drips, but there weren't any.


Here it is immediately after gluing.


Here's a close up of the forward seat after the epoxy set.